Spiral Jet Mill for Cobalt Tetroxide

Spiral Jet Mill for Cobalt Tetroxide technology is one of the important basic technologies in modern industries. In modern industries, the raw materials that require a powder state have a small and uniform particle size and higher purity, passing through ultrafine The nature of the raw material changes, which makes ordinary materials have a broader application range,

With the continuous increase in social needs, the performance, product quality, etc. of Spiral Jet Mill for Cobalt Tetroxide are facing huge. Challenge. Therefore, ALPA Technology Co., Ltd. persisted unremitting, continuously improved the superfine grade strength, particle size distribution, particle crystal form, etc. to achieve more production.
ALPA, strive to achieve low energy consumption, high yield, non-pollution in ultra-fine classifier, achieve good granularity, dispersion, unique and potential performance of the product, improve the competitiveness of powder classifier, environmental protection and low Power performance.

Spiral Jet Mill For Cobalt Tetroxide Principle and Features: When the compressed gas enters the crusher by the feeder, the pulverized raw material enters the pulverizer, there are multiple pulverized nozzles in the pulverizing chamber, and the supersonic air flow is sprayed, so that the material is subjected to a high speed of the material. The impact and the material collide with each other, friction and pulverize, the grading tube separates the thicker particles, the crude particles continue to be pulverized, and after the internal closed circuit is pulverized, ultrafine powder can be obtained in the discharge port. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.

Any machine device must pay attention to it before use, you must pay attention to the use, operation, make it damaged to the lowest, then what should you pay attention to before using the Spiral Jet Mill for Cobalt Tetroxide?
1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.
2, lubrication should be performed as required to ensure the normal operation of the machine.
3, before adding the material to the pulverizer, it is not mixed to avoid damage to the grinding machine.
4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.

5. If there is any abnormality in use, it should be treated immediately to avoid more loss.
6, some parts should be checked regularly.If it is damaged, it should be replaced immediately.

ALPA Battery SPLAL JET MILL for Cobalt Tetroxide case share:
A new energy company is a high-tech enterprise specializing in the development, production and sales of new energy materials, and the company is committed to the study of new energy materials.And innovation, the company's products include the special tetracantoxide of lithium battery, magnetic material tetraside and lithium battery positive electrode material manganese acid.
The company has advanced technology and excellent quality, and has established a complete quality management operation system.
Case parameters

Hour Yield: 600kg

Free experiments and testing, and provide 24-hour consultation services, welcome to use.