Jet Mill of aluminate

Jet Mill of Aluminate as the name is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.

What are the advantages of jet mill of aluminate? ? Let's take a look at it.
First, the pulverized particle size is small, the distribution is uniform. Since the power distribution on the Jet Mill of Aluminate material is quite uniform. The ultrafine pulverizer is an apparatus for ultrafine pulverization of dry materials by using air separation, high pressure comminution, shear and other techniques. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material collection system, etc. The setting of the grading system not only strictly limits large particles, but also avoids the occurrence of pulverization, thereby obtaining a uniform powder having a uniform particle size distribution. At the same time, the specific surface area of \u200b\u200bfine powder increases, and the amount of adsorption and solubility are also increased accordingly.
Second, reduce pollution, more environmentally friendly: ultrafine pulverization is carried out in a closed system, which avoids the pollution of fine powder to the surrounding environment, and prevents dust pollution products in the air. Therefore, Jet Mill of Aluminate applies the technology to food and health products, which can effectively control the specific gravity of microorganisms and dust. The ultrafine pulverization speed is high and can be pulverized at low temperatures. Ultra-fine pulverization technology is smashed with ultrasonic air flow, cold grinding and other methods, which are completely different from the conventional pure mechanical pulverization method. After the gas fine particles are broken to the high-speed cyclone separator, the high-speed cyclone separator is broken, and the high-speed cyclone separator enters the coarse-grain separator, and then enters the coarse grain separation zone via the high-speed cyclone separator, and then enters the coarse grain separation area through high speed. Centrifugal separator.
Third, during the grinding process, there will be no local overheating phenomenon, and can even be smash at low temperatures, fast speed, and can be completed instantly.
Therefore, the bioactive ingredients in the powder can be minimized to produce the desired high quality products.



Jet Mill of Aluminate is disposed with a particularly designed high-pressure intake nozzle, which is contained in a relatively designed high-pressure intake nozzle, which is admitted from the nozzle to form an ultrasonic air flow. Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.

The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles are cut along the turbine.The line direction flies to the chamber wall, and then returns to the pulverizing chamber to be re-crushed. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.

Ultra-micro Jet Mill of Aluminate Operation:
1, check whether there is oil in the lubrication before power on.
2, clearing the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.

5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.

ALPA Soybean Jet Mill of Aluminate Case Sharing: The customer is a company in the Netherlands. The company needs ultrafine pulverization to soybean meal (after oily oil). Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance. Through the incoming experiment, the company chose Jet Mill of Aluminate.

If you have the situation about other crushers, you want to know, welcome to consult!