Disc Jet Mill of Black TEA

With the continuous increase in social needs, DISC JET MILL OF Black TEA is constantly improving in terms of performance, finished product quality, service life, etc., very well, and is well processed into microtes and even nanoscale fine powder, and it is already Wide applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons have been widely used.

What is the design structure of DISC JET MILL OF BLACK TEA?

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The grading point can be continuously adjusted, and the particle size of the DISC JET MILL OF Black TEA can be adjusted. The gradular weight product is up to D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.

Characteristics of DISC JET MILL OF BLACK TEA
1, is suitable for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.
2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.

4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.

DISC JET MILL OF BLACK TEA's daily maintenance is a very important part, which describes the maintenance method of the DISC Jet Mill of Black TEA.
1. When the machine starts or starts, the appropriate amount of grease should be applied to ensure its life.
2. Check if the screws and nuts of each component are tightened. Check if the belt is smashed, whether it is tight.
3, regular inspectionCheck the reliability of the device to prevent accidents or accidents.

4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.

5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
6, electrical components and lines should be checked regularly, whether it is intact, and the ground is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.

ALPA Cobalt Silicate DIT MIET MILL OF BLACK TEA Case Sharing: Beijing Lithium Electric Materials Company purchased a disc Jet Mill of Black TEA from our AlPa in 2020. Ultrafine pulverizer for lithium cobaltate, the company has three particle size requirements for lithium cobaltate, requires a device to be simultaneously satisfied. In response to the unique needs of the company, our ALPA engineers have been working hard to customize a DISC JET MILL OF Black TEA. The pulverizer can meet the production requirements of multiple particle size sections, equipped with subsequent airflow classifier systems, and can be sorted by different particle size products.
Technical parameters:
Finished particle size: lithium cobaltate small particles D50: 3-6 μm; lithium cobaltate large particles: 50: 8-20 μm; Trimetimeterials D50: 6-13μm;
Production capacity: Lithium cobaltate small particles: 250kg of lithium cobalt acid lithium large particles: 500KG ternary: 500kg

ALPA is a well-known particle and powder processing system supplier, which is committed to the change in traditional powder industry. We provide customized and passed CE certified products: airflow pulverizer, mechanical pulverizer, airflow classifier, ball milling production line, surface modification production line, etc. In the field of medical, food, chemical, minerals, new materials, solid waste treatment, we have a mature full-specific solution. We provide more than just machines. We help you design the ideal system to meet your needs. In the past 20 years, \"the future\" of the advanced materials in powder technology \"has always been our company mission. We look forward to and desire to embrace the future. To this end, we have made full preparation. We wish to grow together with you.