Spiral Jet Crusher Of Pesticide

As is well known, Spiral Jet Crusher Of Pesticide This product technology has received extensive attention from the industry.

Airflow pulverized products except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape, high purity, high activity, good dispersibility, etc. Since Spiral Jet Crusher Of Pesticide generates a Juromon cooling effect during the crushing process, it is also suitable for low melting point and ultrafine pulverization of thermal material. The gas ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated. When the particle size of the feed is pulverized, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.

Spiral Jet Crusher Of Pesticide Work: By manuality, the material is uniform, fed into the pulverized mouth, under the action of the fixed knife and the rotary knife, and cut various straw into small segments, then Enter the crushing room, under the strong hit of the high-speed hammer, the material is rapidly pulverized, and the pulverized material falls into the screen due to the large amount of wind pressure and a large amount of wind pressure in the built-in fan. The cavity is sent from the wind pressure transfer pipe to the aggregate room.

SPIRAL JET CRUSHER OF Pesticide Motor Maintenance Measures
1, check whether the lubrication of the bearing is good
2, check if all fasteners of the pulverizer are fastened.
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.

ALPA desulfurizer Spiral Jet Crusher Of Pesticide case share: The company is a high-tech company that requires a desulfurizer crusher, investigating a number of fine powder equipment manufacturers at home and abroad, and finally selected Our Alpa's Spiral Jet Crusher Of Pesticide.
Technical parameters:
Finished particle size: 200 mesh 90% passed
Production capacity: 4-5T

Spiral Jet Crusher Of PesticIDe produced by our company can not only be divided into 20-2μm from ordinary powdersWith fine micropowder, it can be used directly with mechanical pulverization equipment, forming a closed circuit, improving pulverization efficiency, and avoiding high temperatures in the cavity to cause adhesion, glue, causing the operation, and the grading machine has also been widelyThe user has always been praised, and the friends who need it will contact us!