Jet Mill of AxitinibiB

With the development of society and the needs of life, the demand for Jet Mill of Axitinib is getting bigger and bigger, and the requirements for fineness, purity and pass rate are increasing. In the current market, there is a great development space.

Jet Mill of Axitinib has a wide range of pulverized particles, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments. When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh. So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.

What are the characteristics of Jet Mill of Axitinib? Ultrafine airflow classifier, particularly suitable for brittle materials, the hardness of the material is suitable in Mogie 1-3, such as graphite, kaolin, quartz and other non-metallic minerals. Due to the high speed of the microcomputer, the intake air is large, it is used to grind heat sensitive materials, synthetic resins, sulfur, pesticides, food, Chinese herbal medicine, phosphoric acid, magnesium carbonate and other items.

Jet Mill of Axitinib generates certain noise during production, the main reason for generating noise is:

(1) When the coal mill is running, the operating member drives air to generate a \"whistle\" call. :
(2) The device is running. Generate vibration sound; (3), the friction between the turntable or the hammer and the drug; the rotating part itself is friction.

For the cause of noise, the main solution is as follows:
(1) adding oil to each rotating member, if the bearing and the axis are misalign, adjust the bearing wear, replace the bearing;
( 2) The heat generated during the breaking process also produces noise, and cools the cooling of the crushing chamber, the muffler is mounted in the air intake port of the pulverizer; (3) damping the damping pad and other devices.

ALPA Potassium Sulfate Jet Mill of AxitiniB Case Sharing: This customer is a Saudi company, which needs to grade the potassium sulfate ultra-fine powder, and investigate the international powder equipment company. Machine equipment.

To find out moreJet Mill of AxitiniB's knowledge, please pay attention to the Shan Dong AlPA website, the company is trustworthy by the company's research and production of crusher and other products, quality, and is trustworthy.