Jet Mill of Refractory CLAY ORE

Because Jet Mill of Refractory Clay Ore is widely used in all walks of life, the research and development of classified machines at home and abroad pays great attention. In the current market, there is a great development space.

Jet Mill of Refractory Clay ORE is based on particle size, shape, density, no water, no water washing, complete dry, can obtain narrower particle size distribution, non-polluting micropowder;

Efficient grading, eliminating wear technology, reliability, no leakage technology, large particle control technology, fine powder extraction technology, complete, stabilized flow field design technology, constant gas-solid concentration than design technology, regulate a certain number of product yields
Small wear, can be highly purified, ultra-narrowly machined ultrafine powder, avoiding the wear of the horizontal grade machine. Under the same material, the service life of the equipment is more than 5 times the ordinary classifier;
High grading accuracy, stable and complete hierarchical flow field, and special sealing measures, reliably prevent leakage of crude particles, vertical Circulation in the turbine grading machine guarantees qualified product particle size;
full-negative pressure, no dust pollution, equipment does not need to do the foundation, convenient for maintenance and maintenance. Online detection can be implemented according to user needs, and automatic automatic unmanned production operations are implemented.

Jet Mill of Refractory Clay ORE:

1
2, the outer casing uses water cooling and its own air volume delivery crushing material, increase the temperature, and pulverizing the thermal material.
3, the wear of the blade is generated by a large amount of ultrasonic eddy current generated by the back of the blade and the vibration of the high frequency pressure.
4, the structure is compact, there is no dust overflow problem.
For the long-term \"health\" of the equipment, we need to take some steps to protect them again.
1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are different, the raw materials are different, the hammer screening gap needs to be adjusted; in the crusher, the crusher is not very good at the beginning, but after a period of time Work, the particles inside the crusher also changes; in the grinding machine parts, the hammer head is easily worn, and the gap between the hammer head and the screen is increased, and the yield is also declining, it is difficult to maintain.
Of course, in order to test the yield of certain crushers, for some of the materials, for some screen holes, in order to determine suitable hammer sieve gaps and suction, no matter the screen andHow is the life of the hammer, you can get very high grinding efficiency data in a short time. However, in the production of feed grinding, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.
2.Jet Mill of Refractory Clay ORE is mainly a renewal burr that is mainly used: mainly to rush the side hair of the screen into the inside, greatly increasing friction, but this method is not used for a long time. After the globi polishing, the efficiency is lowered. It lasts for 30 minutes to 1 hour.

3. Put the friction piece into Jet Mill of Refractory CLAY: The friction sheet has the effect of the material ring, but the effect is limited. First, the teeth of the friction plate are in front of the hammer head, the friction surface is small, and the hammer is long-lasting; if the sieve area is too small, the output screen area will be reduced.

For any device, everyday maintenance can be performed, it can ensure that the equipment can run for a long time, so daily is critical to the maintenance of Jet Mill of Refractory Clay ORE.

ALPA Activated Carbon Jet Mill of Refractory Clay Ore Case Sharing: This customer is a research institute Dalian, which requires ultrafine pulverizing activated carbon during research. Investigate a number of domestic vendors, and finally choose to cooperate with our AlPa, and purchased a Jet Mill of Refractory Clay ORE.

Jet Mill of Refractory CLAY ORE produced by our company can not only distribute 20-2μm from the ordinary powder, but also directly with mechanical pulverization equipment, form closed circuits and improve pulverization efficiency. And can prevent high temperature in the cavity to cause adhesion, glue, glue, causing operations, and at the same time, the classifier has also been well received, and friends who need it are in contact with us!