Steam Jet Mill for Pea Fiber

Most of the product production and processing in the current stage use STEAM JET MILL for Pea Fiber, the use of STEAM JET MILL FOR PEA FIBER is a very common way of processing, accompanied by the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

The main performance characteristics of the pulverizer:

1, the airflow pulverizer includes a vertical hierarchy device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particles.
2, the airflow pulverizer is easy to disassemble, the inner wall is smooth, no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
3, the airflow pulverizer control system adopts program control, easy to operate.

Steam Jet Mill for Pea Fiber works as: compressed air is dry, dry, and then enter the pulverizing cavity through the nozzle. In the pulverizing cavity, the material can be pulverized by a high pressure gas stream. Thereafter, the crude material can be separated from the centrifugal force generated by the grading turbine. Particles that meet the particle size requirements are in the cyclone separator and the dust collector, and the particles collected, and the particles that do not meet the requirements continue to be pulverized.

Steam Jet Mill for Pea Fiber Nurse Not small causes simple analysis, the material is stacked in the silo plate knot, the material suction cake, the material appears in the silo, the silo cone angle The reasons for the resting horn such as refer to the material. Solving silo does not small materials suggests design phase to fully understand the properties of materials, such as pile specific gravity, liquidity, moisture resistance, rest horn, particle size, flammable and explosive properties. Using auxiliary measures, such as air disc, air hammer, air blowing, vibration discharge mechanism, artificial hitting, etc. The pulverizer is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.

Steam Jet Mill for Pea Fiber's feeding system isOne of the key components, often encountered problems in actual use, such as the silo, not even if the feed is not uniform, even can't feed. Simple analysis of non-uniform feeding of feed is more sticky or fluidity, and the design of the feeding system is designed. Feeding uneven resolution suggests based on material properties systemic solution, such as silo structure, auxiliary sheet structure, feeding valve structure, auxiliary feeding measures, and ventilation and control systems. The feeding system is generally silo, auxiliary tablet equipment, and feeding mechanism three components, depending on the material properties, the design parameters of the feeding system are different.

The above is the use of the STEAM JET MILL FOR PEA Fiber product precautions and simple solutions, everyone must pay more attention when using it.
ALPA Aluminate Steam Jet Mill for Pea Fiber Case Sharing: The company discovered that domestic ultrafine pulverized equipment, which has been flattened with similar companies in foreign countries. And the price is more advantageous than foreign similar import companies. Finally, our Steam Jet Mill for Pea Fiber was purchased as a production equipment.
Technical parameters:
finished particle size: D97: 20μm
Production capacity: 100kg

As a 20-year powder engineering equipment manufacturer, Shandong AlPa has more than 3,000 domestic and foreign Home customers, rich research and development and production experience will always lead to the front end of the industry, so before consulting, you need to provide the characteristics of the crushing materials, the granular parameters, production and production yield, purity requirements, specific process requirements (anti-high temperature, explosion-proof, anti-proof Dust pollution, etc.), professional engineers provide appropriate equipment models or system solutions according to this information. Welcome to inquire.