Spiral Jet Mill for Antioxidants

Spiral Jet Mill for Antioxidants This product technology has been widely valued by the industry. The grinding mechanism of Spiral Jet Mill for Antioxidants is mainly used to determine its wide range of applications, high fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine. Spiral Jet Mill for Antioxidants converts the normal gas from the gas source portion to nitrogen, carbon dioxide and other inert gas, is an inert gas protection device, which is suitable for use in flammable and explosive, oxidative materials, comminution, grading, and processing.

A Spiral Jet Mill for Antioxidants cost is high. If you want to use Spiral Jet Mill for Antioxidants for a long time, please pay attention to the following:

1. During the production process, Temperature rises in the bearing frequently, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. Spiral Jet Mill for Antioxidants host and level score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature It will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a seven point introduction to the daily maintenance of Spiral Jet Mill for Antioxidants.


Spiral Jet Mill for Antioxidants Working Principle:
The power of the machine uses purification and dry compressed air. The compressed air is sprayed into the crushing chamber at high speeds of special supersonic nozzles. High-speed motion with materials with materials, leading to strong collisions, friction and shear between materials and materialsThereby achieving breaking. Outlet, enter the collection system. The pulverized material rises into the classification chamber to meet the particle size required by the granularity, and the particles do not reach the particle size required to continue pulverization. The entire production process is fully closed, continuous operation, no dust pollution, purified by dust removal, filtration.


In the production process, Spiral Jet Mill for Antioxidants produces certain noise, and the main reason for generating noise is:
(1) When the coal mill is running, the operating component is driven. Air Generations \"Sleins\" Call:

For the cause of noise, the main solution is as follows:
(1) adding oil to each rotating member, if the bearing and the axis are misalign, adjust the bearing wear, replace the bearing;
( 2) The heat generated during the breaking process also produces noise, and cools the cooling of the crushing chamber, the muffler is mounted in the air intake port of the pulverizer; (3) damping the damping pad and other devices.

ALPA Sulfate Spiral Jet Mill for Antioxidants Case Sharing: This customer is a Saudi company, you need to grade the potassium sulfate super fine powder, and investigate the international powder equipment company, and finally chose our alpa. Grading machine equipment.

If the later period is intended for superfine grade machines, precision grading machines, jet classifiers, you can directly contact us, product quality is guaranteed, fair, good service, welcome everyone to buy!