Fluidized Bed Jet Mill of Potash Feldspar

In numerous pulverization, FLUIDIZED BED JET MILL of Potash FeldSpar has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular, it is suitable for disinfection of materials such as pulverization drugs.

Fluidized Bed Jet Mill of Potash FeldSPAR technology is designed and manufactured in the classification wheel.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.

Fluidized Bed Jet Mill of Potash FeldSpar Working Principle:

The qualified fine powder is delivered to the hierarchy of the upper portion of the comminution device through the rising airflow. The classifier classifies the qualified materials and enters the cyclone collector (if a product having several particle size is required, add a plurality of vertical turbine classifiers). Fine tails are delivered into the bag dust collector via airflow. After filtration, the tail enters the exit of the lower part of the filter and empty the air.
Native components: classifier, grinding, grading, synchronous completion, to adjust the speed of the classifier through the frequency conversion speed, can adjust the fineness of the product. For example, if a machining process requires a number of particle size sections of the product, then two to four can be increased on the basis of a standard classifier, so that the machine becomes the \"two five\" machines of pulverization and grading.
Super Fluidized Bed Jet Mill of Potash FeldSpar is a widely used industry with air separation, heavy polishing, and shear. It is widely used in various industries. Let's take a brief introduction to its daily maintenance content.
1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, easy to wear parts should pay attention to the wear of the wearDegree, pay attention to and prepare for replacement of wear parts.

3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.

4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.


Alpa Solid Mannin Fluidized Bed Jet Mill of Potash FeldsPAR Case Sharing: A food company requires large production of solid mannitol ultrafine powder. Many of the domestic powder companies have not found a crusher of the compound GMP standard food grade production. The general compound GMP standard pulverizer does not meet the large capacity required for the company. With our ALPA, the company purchased 1 Fluidized Bed Jet Mill of Potash Feldspar of our company. The demand for the large production of solid mannitol is met, which is satisfied with the GMP standard.
Technical parameters:
Grain size: mannitol: greater than 710 um account for 7.34%

Production capacity: Mannitol: 2T

Welcome everyone to visit Shandong AlPA website, company specializing in Fluidized Bed Jet Mill of Potash FeldSPAR product technology production and development and service, high-energy technical experts, professional after-sales service team, solved the worries of customers.