Jet Mill of Graphite anode

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

Jet Mill of Graphite Anode is suitable for combating machinery for synthetic resins, food, chemicals. The apparatus is different from the ordinary inner grinding machine, not only simply crushed, such as impact force and cutting force, but also by many generated ultrasonic eddy currents and vibration thus generated high-frequency pressure vibration to crush the material. Under certain conditions, the viscous material and the elastic material can also be pulverized. The pulverizer is almost no increase in the cyclic temperature during the pulverization process, so the thermal material can also be pulverized. The pulverizer has a reasonable structure, stable operation, low energy consumption, large crushing capacity, small size, no fault, easy to clean and maintenance. General shells use water cooling and their own air volume, conveying crushing materials, improves temperature, and reduces thermal materials. The wear of the blade is caused by a large amount of ultrasonic vortex generated by the back of the blade and the vibration of the high frequency pressure. Compact, no dust, no dust.

Jet Mill of Graphite ANODE has a specially designed high-pressure intake nozzle, which is contained in a relatively designed high-pressure intake nozzle, which is squeezed from the nozzle to form an ultrasonic air flow. Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.

The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.


Now let's talk about the disclosure of common faults in Jet Mill of Graphite anode.

JET MILL OF Graphite Anode Troubleshooting:

1 It will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. Replace the bearing by replacing the lubricantAnd the spindle, the balance rotor and the adjustment belt are elastic, and the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.

ALPA Trimage ANODE Case Sharing: The company requires a three-dimensional material ultrafine pulverizer, and our AlPa Jet Mill of Graphite Anode is also well known in the industry. There is a lot of proportion in the industry. Through experiment, the company purchased a company Jet Mill of Graphite Anode.
Technical parameters:

finished particle size: D50: 10μm

Production capacity: 5-10kg / h

If there is related requirements, please call us!