Steam Jet Mill for Oleic ACID Protein Mix

STEAM JET MILL for Oleic Acid Protein Mix is \u200b\u200ba crushing device commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

In the production process of crushing using Steam Jet Mill for Oleic Acid Protein Mix, the ultrasonic air flow generated by the device can constantly collide between the materials, and this supersonic airflow can also It has a good impact on raw materials, and then the material can also have a good crushing effect with the inner wall of the equipment.

Steam Jet Mill for Oleic Acid Protein Mix The pulverization chamber is arranged with a particularly designed high-pressure air nozzle, which is purified and dried, and the ultrasonic air flow is formed from the nozzle. Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.

The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.

1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be based on the frequency and carrying capacity of the grading wheel.Force adjustment.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

ALPA Solid mannitol Steam Jet Mill for Oleic ACID Protein Mix Case Sharing: A food company requires large production of solid mannitol ultrafine powder. Many of the domestic powder companies have not found a crusher of the compound GMP standard food grade production. The general compound GMP standard pulverizer does not meet the large capacity required for the company. With our ALPA, the company purchased 1 Steam Jet Mill for Oleic Acid Protein Mix of our company. The demand for the large production of solid mannitol is met, which is satisfied with the GMP standard.
Technical parameters:
Finished particle size: mannitol: greater than 710 um 7.34%
Production capacity: Mannitol: 2T


Need to buy Steam Jet Mill for Oleic Acid Protein Mix Product Users can choose Shan Dong Alpa, which is a manufacturer specializing in the production of various eddy current crushers, affordable, after-sales service.