Spiral Jet Mill for Attapulgite

Spiral Jet Mill for Attapulgite is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Spiral Jet Mill for Attapulgite device Integration of equipment and process research and development. Since the ultrafine powder grinding equipment must be adapted to specific material characteristics and product indicators, their specifications and models are varied, so there is no ultrafine powder grinding and grading equipment for any material.
Although China's crusher manufacturers are numerous, the overall R \u0026 D capability is weak, low product technology, and does not meet the application needs of high-end powder metallurgical equipment in the downstream field, and severely constrain China's crushing equipment development, with domestic manufacturers R \u0026 D The continuous investment and technology breakthroughs, domestic crushing equipment is expected to occupy greater share in the global market.

Spiral Jet Mill for Attapulgite Working Principle: By manuality, the material is homogeneous, fed into the pulverized port, and cut into various straw under the action of the fixed knife and rotary knife The small segment, then enter the crushing room, under the strong hit of the hammer placed at high speed, the material is rapidly pulverized, due to the large amount of the built-in fan, the large amount of wind pressure and the underworld pressure of the underclocking chamber, the crushed material is sieved. Falling into the lower chamber, sent from the wind pressure transfer pipe to the aggregate room.

Ultrafa Spiral Jet Mill for Attapulgite Inspection before debugging:
1, newly installed equipment Foreign objects such as slag. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.

ALPA Gas Gem Spiral Jet Mill for Attapulgite CaseSharing: This customer is a high-tech enterprise in R \u0026 D, production and sales of nano-energy, fireproof, heat insulation new materials. It is necessary to use ultrafine pulverizer during production, multi-party examine the last purchase of our AlPa's Spiral Jet Mill for Attapulgite.
Technical parameters:
finished particle size: D90: 15-30UM

Welcome everyone to continue to pay attention to our website to learn more!