Jet Mill of Elemental POLYSILICON

Jet Mill of Elemental Polysilicon is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good precision.

Ultrafine pulverizer and ordinary pulverizer Differences in the crushing:
The ordinary pulverizer generally only smashes into 200 mesh, 200 messenger is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.

Jet Mill of Elemental Polysilicon's working principle The airflow pulverizer, the dust separator, dust collector and the introducer becomes a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed Ravier nozzle. At the intersection of multiple high pressure airflow, the material is repeatedly collided, friction, shear and broken. Under force, the thickness, fine product is separated, and fine particles that meet the particle size requirements are collected by a cyclone and dust collector by a grading wheel, and the crude particles reduce to the crushing area continue to break.

The factors affecting the operation efficiency of Jet Mill of Elemental Polysilicon have the following points:

1. Material performance, in general, air pulverization equipment can adapt to the break of all brittle materials, but due to material properties Different, the crushing performance is also different. Due to the strength, density, hardness, viscosity, shape and electrical energy of different materials, it will inevitably lead to differences in the crushing effect, and the strength of the material is an important factor, and some materials have a water content Change the performance, toughness, and viscosity of the crushing material also produce noise to the fineness of the pulverized material.
2. If the processing capacity of the device is the same, if the processing material is different, the grinding fineness will be different. In general, the processing capacity of the airflow grinding machine is proportional to the particle size of the product.
3. The influence of back pressure refers to the average pressure of the pulverized indoor gas, and the increase in back pressure is not conducive to the crushing process, affecting the efficiency of gas flow grinding equipment.

ALPA Peel Jet Mill of Elemental Polysilicon case Sharing: The company has developed, processed, sold in a food professional processing company. After multiplayer discovery or our AlPa Jet Mill of Elemental Polysilicon PlaceHave requests.
Technical parameters:
Production capacity: 2T +/- 10%

If you still have questions, you can directly contact AlPa Technology Co., Ltd., company leading products Jet Mill of Elemental Polysilicon systemCurrently, the grading field of small particles that cannot be processed in the dry airflow is obtained, breaking through the boundaries of dry grading, equipment system in rare earth polishing powder, metal powder, silver powder, tungsten powder, alumina, battery material, ceramic powder, Carbonyl nickel powder, iron powder, toner, resin, pigment, mica powder, cosmetics and other industries have won a wide range of applications, warmly welcome users to come to consult, our company equipment is manufactured, the size is complete, there is a setSuitable for you!