Jet Mill of Pole Piece

Jet Mill of Pole Piece Technology is one of the important basic technologies in the modern industry. In the modern industry, the raw materials that require a powder state have a small and uniform particle size and a higher purity, and ultrafine raw materials. Its nature changes, which makes ordinary materials have a broader application range,

Jet Mill of Pole Piece is applied to the ultrafine pulverization of the material, and the material will have a better powder after extracting the disposal. Large changes, as high viscosity after being affected, easy to cake. Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design. Shan dong alpa design-developed material smashed hit in the crushing of materials.
JET MILL OF POLE PIECE Compressed Gased The high-speed jet generated by the feed nozzle The material particles in the bucket are taken into the disc shocking chamber 3, and several jet nozzles are provided around the crushing chamber. The high-speed fluid is injected in the direction, producing an ultra-high-speed swirling in the pulverizing chamber. The coarse particles in the opposite ultra-high-speed swirls in the superiospantial cyclone generate hit and friction in the intersection, and the particles were quickly pulverized. When the particles are pulverized to the fractional particle size below the fractional particle size, the centrifugal force of the particle movement is reduced, and the grading swirling is separated from the center outlet under action, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in both directions. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverizing effect, and only in the other direction, the particles are opposite, and the particles produce effective impact. Therefore, this impact of the intersection is limited, and the energy of ultra-high-speed moving particles has not been fully utilized, so the production energy consumption is still high.

Now let's take a look at the performance advantages of Jet Mill of Pie Piece!

First, the classifier can be classified by spherical shape, if the particles of different densities can also be effectively used in this class. Graded.
Secondly, the gradular product of this classification machine is adjustable, and the replacement is also very convenient.
Furthermore, since the flow performance is good, the grading efficiency of the ultrafine airflow classifier will be high.
Not only that, the classifier also adopts high quality production materials, so the wear resistance of such grading machine equipment is also very good.

Ultra-micro Jet Mill of Pole Piece's correct usage:

1, the ultrafine pulverizer and power unit should be securely installed. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a flow operation, the unit should be installed on the base made of angle iron, and guarantee the power machine (diesel engine or electric motor)The belt wheel groove of the pulverizer is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

AlPa Aluminate Jet Mill of Pole Piece Case Sharing: The company discovered that domestic ultrafine pulverized equipment, which has been flattened with similar companies in foreign countries. And the price is more advantageous than foreign similar import companies. Finally, our Jet Mill of Pole Piece was purchased as a production equipment.

Technical parameters:
finished particle size: D97: 20μm
Production capacity: 100kg

For more consultation, please continue to pay attention to us, or inquire.