Steam Jet Mill for Gold Ore Tailings

Since STEAM JET MILL for Gold Ore Tailings is widely used in all walks of life, the research and development of classified machines at home and abroad attaches great importance to it. In the current market, there is a great development space.

Steam Jet Mill for Gold Ore Tailings requires the integration of equipment and technology research and development. Since the ultrafine powder grinding equipment must be adapted to specific material characteristics and product indicators, their specifications and models are varied, so there is no ultrafine powder grinding and grading equipment for any material.

Although China's crusher manufacturers are numerous, the overall R \u0026 D capability is weak, low product technology, and does not meet the application needs of high-end powder metallurgical equipment in the downstream field, and severely constrain China's crushing equipment development, with domestic manufacturers R \u0026 D The continuous investment and technology breakthroughs, domestic crushing equipment is expected to occupy greater share in the global market.

Next, let's take a look at the working principle of the ultrafine pulverizer.

When working, the material to be pulverized from the feed hood on the side of the hood shell, relying on the grinding roller device suspended on the main plum flower frame, rotating around the vertical axis, and itself is rotated, due to rotation The role of the grinding roller is swing outward, pressing the mill, so that the shovel shovel is sent between the mill and the abrasive ring, and the purpose of the pulverized material is achieved due to rolling rolling of the grinding roller. Warlective process: After the material is ground, the fan blows the wind into the main casing, blows the powder, and is selected from the analyzer above the grinding chamber, and the fine material is refined into the grinding chamber. The style of constructing the wind flow into the cyclone collector, and after collecting the powder, it is the finished product.

The wind flow is reflected in the wind turbine in the upper end of the large cyclone collector, and the wind path is cycle, and in the negative pressure state, the air of the circulating wind turbine increases the exhaust gas pipeline between the flowers and the middle of the main unit. Small cyclone collector for purification treatment.

Steam Jet Mill for Gold Ore Tailings is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.

2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be based on the grading wheelThe frequency and load carrying capacity are adjusted.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

ALPA Light Bagnes Magnesia Steam Jet Mill for Gold Ore Tailings Case Sharing: This customer is a device company, focusing cement, mine, chemical, electric power, metallurgy, etc., mainly engaged in the establishment of these industries Wear equipment, the customer needs to support its customers more suitable airflow classification equipment, after many exam, I chose our ALPA air classifier. Buy two devices. Product particle size: D80: 15μm hour yield: two 15t / h.
Our AlPA classifier can support ball mills, vertical grinding, Raymond mill, mechanical mill, etc., welcome customers to visit, incompetent experiments.

The superfine grade machine produced by AlPa can be produced simultaneously for multiple particle size products. Welcome new and old customers to come to consult!