Steam Jet Mill for Loxofina

In the classification operation of industrial production at this stage, the use of STEAM JET MILL for LoxOfina is mainly targeted for the effective crushing of solid particles, and is the case where we are more commonly used in the product ultrafine pulverization process.

Airflow pulverized products except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape, high purity, high activity, good dispersibility, etc. Since Steam Jet Mill for LoxOfina generates a Juromon's cooling effect during the pulverization process, it is also suitable for ultrafine pulverization of low melting points and thermal materials. The gas ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated. When the particle size of the feed is pulverized, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.

What are the characteristics of Steam Jet Mill for LoxOfina? Ultrafine airflow classifier, particularly suitable for brittle materials, the hardness of the material is suitable in Mogie 1-3, such as graphite, kaolin, quartz and other non-metallic minerals. Due to the high speed of the microcomputer, the intake air is large, it is used to grind heat sensitive materials, synthetic resins, sulfur, pesticides, food, Chinese herbal medicine, phosphoric acid, magnesium carbonate and other items.

How do I continue Steam Jet Mill for Loxofina? Here are the following aspects:

1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.

2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
3, regular inspections for the lids, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.

AlPa Aluminum Silicate Steam Jet Mill for LoxOfina Experiment: A environmental protection technology company needs due to production needsThe aluminum ultrafine powder is to be graded, because it is not possible to achieve the demand, so the experiment can be carried out, and the aluminum silicate ultrafine powder supplied by the company can be classified by experimenting our ALPA air grade machine equipment. Finally, after experimentProduct particle size: D90: 18.3μm, yield: 460kg / h 加 加.

Welcomes all major powder grading needs manufacturers, visit the factory, incoming experiments.

Shandong Alpa is a company with research and development in Steam Jet Mill for Loxofina. After years of gradual precipitation and accumulation, experienced and has multiple patents.In STEAM JET MILL for Loxofina, there have been tens of thousands of devices at home and abroad, often have to order our products again, enough to explain the reputation of Shandong Alpa Steam Jet Mill for Loxofina.Welcome to inquire!