Spiral Jet Crusher Of Glass Flakes

Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of China's Spiral Jet Crusher Of Glass Flakes technology is stable and developed to focus, strong, high quality, high quality.

Spiral Jet Crusher Of Glass Flakes is based on the size of the powder particle size, the specific gravity is different, and the segmentation speed is different from the principle of the settling speed in the gas. The classifier, cyclone separator, dust collector, and the introducer make a set of hierarchical systems. Under the action of fan pulleys, the material is moved at a high speed, and the up airflow into the grading area. Under the action of the powerful centrifugal force generated by the high-speed rotation grading turbine, the coarse, fine particles are separated, and the fine particles that meet the particle size requirements by the gap of the grading wheel blades or the dust collector are collected. After the crude particles are partially fine particles, the velocity along the wall to the secondary air is disappeared and reduced.

The strong washing effect of the secondary wind, the thick particles are separated, and the fine particles rise to the secondary level of the secondary level, and the crude particles reduce the discharge port.

The pulverization chamber of Spiral Jet Crusher Of Glass Flakes is arranged in oppositely designed high-pressure intake nozzles, which are short-purified from the nozzle, forming an ultrasonic air flow. . Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.

The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.


How to properly operate SPIRAL JET CRUSHER OF Glass Flakes?

Before booting, the connection site, sealing and line, etc. Grading machine.

The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
should be based on the size of the powder classified machineTo determine the amount of feed, make sure the host is in the state of rated load.The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power.The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.

ALPA Gas SPIRAL JET CRUSHER OF Glass Flakes Case Sharing: This customer is a high-tech enterprise in R \u0026 D, production and sales of nano-energy, fireproof, heat insulating new materials, and it is necessary to useMicroscopy machine, multi-party examiner finally purchased our AlPa's Spiral Jet Crusher of Glass Flakes.

Technical parameters:

Finished granularity: D90: 15-30UM

The technology of Spiral Jet Crusher Of Glass Flakes produced by AlPa makes the structure easier to make the classified machine wear resistance.Friends needed to come to us!