Steam Jet Mill for Atopril

STEAM JET MILL for Atopril uses the use of industrial production in this stage to say that ALPA has been committed to the research and development and application of layers such as grading machines for many years, and we produced during the development process of many years. The classification machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs to our customers in a large range.

For STEAM JET MILL For Atopril's service life longer, it has kept good performance, and it is necessary to keep in mind using common sense.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Steam Jet Mill for Atopril is cleaned in time after use. Keep Steam Jet Mill for Atopril's internal cleaning, avoid oxidation of the material and the inner contact.


Steam Jet Mill for Atopril's working principle airflow pulverizer and cyclone separator, dust collectors and air machines have become a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed Ravier nozzle. At the intersection of multiple high pressure airflow, the material is repeatedly collided, friction, shear and broken. Under force, the thickness, fine product is separated, and fine particles that meet the particle size requirements are collected by a cyclone and dust collector by a grading wheel, and the crude particles reduce to the crushing area continue to break.

In order to let everyone have a further understanding of Steam Jet Mill for Atopril, the following simply analyze the common problems and how to solve these problems.

A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.

A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, does not produce iron pollution. (2) Broken material is easy to wearAfter breaking, it requires high purity and is optimal in stainless steel. (3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.

ALPA Sodium STEAM JET MIET MILL for Atopril case Sharing: This customer is mainly engaged in high energy chemistry, hydrogen production and hydrogen energy development, special gases, fine chemicals, environmental engineering, etc. The research institute requires a device that can be superfined with sodium chlorate. Find a domestic powder equipment enterprise. Finally, we bought a Steam Jet Mill for Atopril in our Alpa.
Technical parameters:
Finished granularity: 100-325 目
Production capacity: 500kg


Welcome everyone to inquire!