Spiral Jet Mill for Corn on The Cob

Spiral Jet Mill for Corn on The Cob is an industrial equipment. With the development of society and the needs of people's lives, the demand for various fine powder is increasingly large, fine, purity and pass rates for various fine powders. The requirements are also getting higher and higher, and the application of the classifier is also more extensive.

What are the advantages of SPIRAL JET MILL FOR Corn on the COB? Let's take a look at it.

First, the pulverized particle size is small, the distribution is uniform. Since the power distribution on the Spiral Jet Mill for Corn on The COB material is quite uniform. The ultrafine pulverizer is an apparatus for ultrafine pulverization of dry materials by using air separation, high pressure comminution, shear and other techniques. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material collection system, etc. The setting of the grading system not only strictly limits large particles, but also avoids the occurrence of pulverization, thereby obtaining a uniform powder having a uniform particle size distribution. At the same time, the specific surface area of \u200b\u200bfine powder increases, and the amount of adsorption and solubility are also increased accordingly.
Second, reduce pollution, more environmentally friendly: ultrafine pulverization is carried out in a closed system, which avoids the pollution of fine powder to the surrounding environment, and prevents dust pollution products in the air. Therefore, Spiral Jet Mill for Corn On The Cob uses the technology to food and health products, which can effectively control the specific gravity of microorganisms and dust. The ultrafine pulverization speed is high and can be pulverized at low temperatures. Ultra-fine pulverization technology is smashed with ultrasonic air flow, cold grinding and other methods, which are completely different from the conventional pure mechanical pulverization method. After the gas fine particles are broken to the high-speed cyclone separator, the high-speed cyclone separator is broken, and the high-speed cyclone separator enters the coarse-grain separator, and then enters the coarse grain separation zone via the high-speed cyclone separator, and then enters the coarse grain separation area through high speed. Centrifugal separator.
Third, during the grinding process, there will be no local overheating phenomenon, and can even be smash at low temperatures, fast speed, and can be completed instantly.
Therefore, the bioactive ingredients in the powder can be minimized to produce the desired high quality products.



Spiral Jet Mill for Corn on The COB Operation Performance: Auxiliary, the hocal dust collector, the bag dust collector is assisted, the host is set in the centrifugal grading device, can be fine grind, and has classification Function, wind-proof cut, no sifter or mesh, powder particles can be adjusted arbitrarily, after crushing materials, negative pressure delivery to the exhaust valve port, reach the product requirements, ultra-fine classifier is widely used in chemical, dyes, coatings , Pharmaceutical, food and other different industries.
SPIRAL JET MILL for Corn on TheThe reasons for COB vibration and solutions can be carried out from the following aspects:
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.

3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.

4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.

5, the spindle bending deformation. The solution is to school straight or replacement.

6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.


ALPA Phenolic Resin Spiral Jet Mill for Corn on The COB Case Sharing: The company has a manufacturer of phenolic resin in its customers. The company has found a lot of powder equipment companies. Suitable equipment. Finally, we found our ALPA. After the experiment, our company's product spiral Jet Mill for Corn on the Cob.
Technical parameters:
Finished particle size: D50 less than 5μm
Production capacity: greater than 50kg / h

ALPA produced Spiral Jet Mill for Corn on The Cob technology makes the structure Simple, the graded machine wear resistance is better. Friends needed to come to us!