Steam Jet Mill for Vitamins

We all know that STEAM JET MILL for Vitamins is a very strong airflow crushing equipment, many stubborn hard materials encountered a crusher to be cut into a uniform block of blocks,

Steam Jet Mill for Vitamins has a wide range of smash, simple and convenient, but during pulverization, there is often a case where pulverization is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments. When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh. So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.

Steam Jet Mill for Vitamins Features:

1. The structure is reasonable, the operation is stable, the energy consumption is small, the crushing capacity is large, the size is small, and it is convenient to clean and maintenance.
2, the outer casing uses water cooling and its own air volume delivery crushing material, increase the temperature, and pulverizing the thermal material.
3, the wear of the blade is generated by a large amount of ultrasonic eddy current generated by the back of the blade and the vibration of the high frequency pressure.
4, the structure is compact, there is no dust overflow problem.

Steam Jet Mill for Vitamins should be operated during the start of
Before starting, first rolling the rotor, check the jaw, hammer and rotor operation, is not flexible, there is no bump in the shell. Icon, the rotation direction of the rotor is not the direction of the corruption, the power machine and the pulverizer are not outstanding. Do not replace the leather wheel at will, to prevent the transition chamber produce burst of pulverization, or the speed is too low

affect the work efficiency of the pulverizer. After the airflow pulverizer starts, it should be idled for 2-3 minutes, no abnormal appearance, then press the job. At any time, you should pay attention to the job status of the crusher, and the feeding should be uniform to prevent jams, do not have long-term overload operations. If there is found that vibration, noise, the bearing and the body temperature is too high, the external spray, etc., should be immediately stopped, exclude the failure of the sustainable job.

AlPa Aluminum Silicate Steam Jet MillFor Vitamins Experiment: An environmental protection technology company needs to grade aluminum ultrafine powder in aluminum silicate due to production needs, as uncertain can not achieve demand, so the experiment is carried out, and the company can provide the company.The aluminum silicate ultrafine powder is graded, and finally the product particle size obtained by the experiment: D90: 18.3 μm, yield: 460kg / h 加量 加量.
Welcome all kinds of powder grading needs manufacturers, visit, incompetent experiment.
Welcome everyone to choose our Shandong AlPa, company specializing in the production and development and service of gas flow crusher product technology, the company provides customers with safe and reliable STET MIET MILL for Vitamins products and services to solve our customersHave worry.