Air Classifier Mill for Cosmetic

Air Classifier Mill for Cosmetic technology is one of the important basic technologies in the modern industry. In the modern industry, the raw materials that require a powder state have a small and uniform particle size and a higher purity, and ultrafine raw materials. Its nature changes, which makes ordinary materials have a broader application range,

Air Classifier Mill for Cosmetic uses high intelligent control system, easy to operate, adjust flexible, long service life, affect system equipment life The main impaired components are a grading knife. If the wear is seriously replaced in time, it will affect the grading accuracy of the equipment.

1. Open the switch in the control cabinet, start the power supply, equipment operation;
2, the raw material enters the feeder
3, the raw material enters the feeder injector in the feeder
4, the raw material reaches the hierarchical body after special dispersion, grading through physical effects such as airflow and gravity;
5, the airflow of the three flow paths has the control valve group adjustment to maintain their respective balance;
6, grading The rear coarse fine product is recovered separately;
7, clean air is discharged into the atmosphere.

1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid blocking.Plug, thus affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

AlPa Quartz Powder Air Classifier Mill for Cosmetic Case Sharing:
A mining company specializes in the development and production of stone-shaped sand, silicon powder,
company produces various models, various quality indicators Quartz sand and water washing stone sand is widely used in: glass and glass products, metallurgical manufacturing, cast steel, precision cast, furnace, refractory, ceramic glaze, ceramic billet, rubber, coating, etc. Guide, negotiate business!
Case parameters:
Product particle size: D100: 11.5UM
Hours Yield: 380kg

AlPa powder is committed to the development and production of ultrafine powder and grading equipment With sales, support according to demand, equipment model, reliable quality, high efficiency, low energy consumption, easy operation, reasonable price, 24 hours can consult!