Spiral Jet Crusher of Petroleum Coke

Environmentally-friendly Spiral Jet Crusher of Petroleum Coke has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the mechanical processing and manufacturing industry in the current stage has gradually replaced traditional rough mechanical processing and production. Production has become a new leading leading to the implementation of technological innovation upgrades at this stage.

Spiral Jet Crusher of Petroleum Coke is an apparatus with ultrafine pulverized by air separation, heavy polishing and shearing. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material acquisition system, and the like. The material enters the cylindrical crushing chamber through the feed port and is pulverized and pulverized by a grinding wheel moving around the wear rail. The pulverized material is taken out from the crushing chamber through the negative pressure air flow caused by the fan and enter the material collection system. After filtering the filter bag, the air is discharged, collecting materials and dust, and completes broken.

Top the working principle of the Spiral Jet Crusher of Petroleum Coke device:

L, the hierarchical device uses the attachment of the radiograph to effectively combine the inertial force, centrifugal force, and the suspension force to design into one Novel ultrafine powder jet classifier. The grading machine reaches high precision, and can be graded, medium and fine powder three levels of products.
2, the jet classifier does not have any moving parts, and only high pressure air is working medium. Reliability for the classifier host, maintenance and maintenance is convenient. The adjustment of grading granularity is also very convenient, and only the flow meter and several gate valves disposed on the machine can be convenient to adjust the grading particle size.

Spiral Jet Crusher of Petroleum Coke is widely used, do you know how to use it correctly? The following content hopes to help you.

1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature too high.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

ALPA Long Stone Powder Spiral Jet Crusher Of Petroleum Coke Case Sharing: The company is a high-tech industry in a industrial company, integrating mineral resources, mining, deep processing in one, main products have six categories: long stone powder, Series of silicon fine powder, aluminum soil, kaolin and other products. The product is high, the particle size, reasonable particle size distribution, stable quality, widely used in electrician, electronics, silicone rubber, ceramics, precision casting and other industries. Products are exported to many countries and regions in China. The company needs airflow selection to ultrafine long stone powder.
Finally, our classifier can meet customer needs.
Product particle size: D50: 16.7

Crushing equipment developed by ALPA has been applied in many actual engineering cases, providing basic information for objective understanding of jet grading technology.