DISC JET MILL of Citric ACID

DISC JET MILL of Citric ACID is a crushed device commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

DISC JET MILL OF CITRIC ACID Technology Design and Manufacturing is a core job.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.

DISC JET MILL OF CTRIC ACID works airflow pulverizer and cyclone separator, dust collectors and air machines have become a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed Ravier nozzle. At the intersection of multiple high pressure airflow, the material is repeatedly collided, friction, shear and broken. Under force, the thickness, fine product is separated, and fine particles that meet the particle size requirements are collected by a cyclone and dust collector by a grading wheel, and the crude particles reduce to the crushing area continue to break.

DISC JET MILL OF CTRIC ACID Motor Maintenance Measures
1, check whether the lubrication of the bearing is good
2, check if all fasteners of the pulverizer are fastened.
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.

ALPA potassium permanganate DIT JETMill of Citric ACID case sharing: This customer is mainly engaged in the development of high energy chemical energy development.The study needs a device that can make ultraf fine pulverized in high potassium permanganate.Finally, I bought a disc Jet Mill of Citric Acid in our AlPa.

Technical parameters:
Finished granularity:
100-325 目
Production capacity: 5kg

For more consultation, please continue to pay attention to us, or inquire.