Air Classifier Mill for Caramel

Air Classifier Mill for Caramel is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Air Classifier Mill for Caramel is in full Crushing in a closed state, the fineness of the pulverized particles is better, the particle shape is good, the output is also large, the pulverization process is no dust production, and the material is purified by the purity after crushing, which greatly saves raw materials. Air Classifier Mill for Caramel can reach the effect of cell-breaking wall during pulverization, so that the effective component dissolution of the medicinal material is greatly improved, and the efficacy is also more likely to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.

AIR Classifier Mill for Caramel Operation Performance: In the cyclone dust collector, the bag dust collector is auxiliary, the host is set in the centrifugal grading device, which can be fine grind, and has a classification function, the wind is cut, no sieve Or mesh, powder particles can be adjusted arbitrarily, after crushing materials, negative pressure delivery to the exhaust valve port, reach the product requirements, and the ultra-fine classifier is widely used in chemical, dyes, paints, pharmaceuticals, food and other industries.

Air Classifier Mill for Caramel should maintain and maintenance
1. Before using, check all standard parts of the device to be tightened, the belt is tight.
2, the spindle operation direction must conform to the direction of the arrow shown on the protective cover, otherwise it will damage the equipment, and may cause human damage.
3, check the electrical appliance is not intact.
4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.

AlPa Light Bagne Air Classifier Mill for Caramel Case Sharing: This customer is a device company, focus cement,Mine, chemical, electricity, metallurgy, etc.machine.Buy two devices.Product particle size: D80: 15μm hour yield: two 15t / h.
Our AlPA classifier can support ball mills, vertical grinding, Raymond mill, mechanical mill, etc., welcome customers to visit, incompetent experiments.

The above is for the use of the AIR Classifier Mill for Caramel, you want to know more about other crushers knowledge, you can pay more attention to us!