Steam Jet Mill for NEEDLE-LIKE PLASTER

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

STEAM JET MILL for Needle-Like Plaster is suitable for microfinishing machinery of materials such as synthetic resins and instruments. It is different from the ordinary pulverizer. It is not only simply crushed such as impact force and cutting force, but also subject to a large amount of ultrasonic eddy current produced on the back of the blade and the vibration of high frequency pressure generated by the resulting material. Crushing can also be broken, viscous and elasticity under certain conditions. The raw material temperature of the machine increased, and the thermal material can be broken.

Steam Jet Mill for Needle-Like Plaster, also called a supersonic pulverizer, before the invention, the principle of the device is: utilizing compressed air by the feed injector, with the pulverization, multiple high-speed flow drive Jet pulverize all methods of rubbing the wall of the wall of the crushing effect, controls the wear weight by adjusting the deep-crowding of grinding, vertically or adjusting the feed speed.

Steam Jet Mill for Needle-Like Plaster is widely used, do you know how to use it correctly? The following content hopes to help you.

1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.

2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) Leaf wheel speed must not exceedThe requirements are required, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
(3) Regularly check the safety valve to ensure safety.

ALPA Trimage STEAM JET MIET MIEL for NEEDLE-LIKE PLASTER Case Sharing: The company needs a three-dimensional material ultrafine pulverizer, and our AlPA's Steam Jet Mill for need-like plaster is also more well-known in the industry.of.There is a lot of proportion in the industry.Through experiments, the company purchased a Steam Jet Mill for Needle-Like Plaster of our company.
Technical parameters:
finished particle size: D50: 10μm
Production capacity: 5-10kg / h

Shan Dong Alpa specializes in the production of Steam Jet Mill for Needle-Like Plaster product technologyDevelop and service, welcome to consult.With a perfect quality, excellent service, the most affordable price, the customer's first attitude provides the best eddy current crusher products and services.