Steam Jet Mill for Rhino Horn

Most of the product production and processing in the current stage, using STEAM JET MILL for Rhino Horn, using Steam Jet Mill for Rhino Horn is a very common way of processing, with the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

Steam Jet Mill for Rhino Horn is a speed, collision with each other, collide with the target, using a high-speed airflow accelerated particle, colliding with the target to achieve a pulverization effect.

Generally, the high-speed airflow accelerated pulverized solid particles have the following three ways:

(1) Airflow particles accelerate nozzle: After the airflow and the particles are mixed, the particles can be obtained. Very high speed (almost the same speed of airflow speed), but the material wears in the nozzle in the nozzle, rarely used in practical applications.
(2) Syringe Acceleration Particles: High Speed \u200b\u200b(Ultrasonic Speed) airflow and particles mix accelerate in the mixing tube, the particles obtain a higher speed, but the material is severe to the mixing tube.
(3) Free airflow acceleration particles: particles enter the high-speed airflow in the form of freely drop, only the high-speed air flow is passed through the nozzle and the wear is small.

What are the characteristics of Steam Jet Mill for Rhino Horn? Ultrafine airflow classifier, particularly suitable for brittle materials, the hardness of the material is suitable in Mogie 1-3, such as graphite, kaolin, quartz and other non-metallic minerals. Due to the high speed of the microcomputer, the intake air is large, it is used to grind heat sensitive materials, synthetic resins, sulfur, pesticides, food, Chinese herbal medicine, phosphoric acid, magnesium carbonate and other items.

Let's introduce the operation method of Steam Jet Mill for Rhino Horn.
1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.

2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.

3. Check if the crusher is complete.

4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.

5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you do not continue, remove the residers from the machine.

8. Regular inspection tools and screens are damaged.If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage.Be sure to tighten the cover to connect the handle to avoid accidents.

ALPA Chemical Pigments Steam Jet Mill for Rhino HORN Case Sharing: The company is a company specializing in research and development, production and sales of high-performance organic pigments. During its production process, the pigment ultrafine pulverized equipment needs to be used..The company's ultrafine crushing equipment is from our AlPa, which uses our company Steam Jet Mill for Rhino Horn.
Technical parameters:
finished particle size: 10-45μm
Production capacity: 300kg


Shan dong alpa produces various types of crushers, can be powdered in powder, ingredients, chemicalMany materials, the highest effect can be more than 10,000.Our products are non-standardized products, which will customize their products according to your needs, and make a reasonable offer according to the product.