Jet Mill of Solid Mannitol

With the continuous development of pulverizer technology, Jet Mill of Solid Mannitol has gradually penetrated into daily life.

JET MILL OF SOLID Mannitol works in work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

JET MILL OF SOLID Mannitol Principles: When the compressed gas passes through the injector, the pulverized raw material enters the pulverization room, there are multiple pulverized nozzles in the pulverizing room, and the supersonic air flow is injected, so that the material is high-speed shock from the airflow. And the materials collide with each other, friction and pulverize, the grading tube separates the coarse particles, the crude particles continue to be pulverized, and after the internal closed circuit circulation is pulverized, ultrafine powder can be obtained in the discharge port. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.

Jet Mill of Solid Mannitol's crushing effect is not ignored, and the role playing in production is huge, so Jet Mill of Solid Mannitol is very important.

1. Analyze the type, design principles and other equipment of the purchase equipment, what is the structure, what effect does it, only fully analyzes and understands these issues, in order to make the selected device fully meet its production requirements.

2, after the equipment is put into production, the easy-to-lose parts, the time required for the loss, whether the equipment needs to be auxiliary equipment and operations,

3, reasonable control These will save time and money for future production.
4. To check the factory where you want to buy equipment, because the factory cost is veryBig, and it is very complicated from design to manufacturing. Equipment manufacturers cannot fully introduce it. The device technical indicators given are also referenced by the device selection. You cannot completely represent the parameters of the device.
5. When purchasing a crusher, we should purchase a supporting equipment as much as possible to complete the installation, save time, smooth production.
Since the equipment manufacturer recommended with the host-related auxiliary equipment is practical, if it is recommended to use bad equipment to customers, it is undoubtedly a brand. Although it has certain profit purposes, its use and equipment are reasonable, it is established in later. Maintenance is also very convenient, this is a good thing for crushing manufacturers.
ALPA pea protein Jet Mill of solid mannitol case sharing: The customer is a food company in Russia. After looking for a lot of powder equipment companies, it did not find the right equipment. It has been influenced by the company's production and operation, and finally I saw the ultrafine pulverization of pea protein before our website. Finally, through the incoming experiment, I finally determined Jet Mill of Solid Mannitol purchased our company.
Technical parameters:
finished particle size: 400 mesh

Production capacity: 1.5T

Shan Dong Alpa specializes in the production and development and service of Jet Mill of solid Mannitol product technology, Welcome to consult. With a perfect quality, excellent service, the most affordable price, the company provides the best crusher products and services for customers.