DISC JET MILL OF POLYETHYLENE

In numerous pulverization mode, DISC JET MILL OF POLYETHYLENE has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

DISC JET MILL OF POLYETHYLENE provides power by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product. In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize. The air pulverizer has an upward nozzle under the bottom of the pulverized chamber tape, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by the nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.

DISC JET MILL OF POLYETHYLENE can be used in series with a multi-stage classifier and produced a product with multiple particle sizes. The device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly. The control system uses program control and easy to operate.

Ultrafi DISC JET MILL OF POLYETHYLENE Check before debugging:

1, newly installed equipment Foreign objects such as slag. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.

2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3Is the air-opening, contactor, heat relay, overcurrent relay adjustment, an air, and overcurrent relay adjustment? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.


ALPA Gypsum DIT MIELL OF POLYETHYLENE case share: The company is a more well-known non-metallic mine company in South Africa. The main product of the company is a super fine ultra-fine powder of non-metallic mines such as stone and gypsum. Through our website, the company learned our equipment and read our case.

Technical parameters:

Finished granularity: D97: 5UM
Production capacity: 140kg

The equipment market is a rapidly changed, and the current airflow classifier has certain needs in the market. However, the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.