Fluidized Bed Jet Mill of Protein

With the development of society, the application of FLUIDIZED BED JET MILL of Protein has become more large.

Fluidized BED Jet Mill of Protein is raised in work, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

Fluidized Bed Jet Mill of Protein Application

1. High hardness materials: silicon carbide, corundum, carbide, alumina, zirconia, garnet, zircon sand, diamond, etc.
2. Non-metallic minerals: quartz, graphite, kaolin, calcium carbonate, mica, heavy crystal stone, mullite, wheat stone, silica bitcite, talc, leaf wax stone, etc.
3. Chemical industry: aluminum hydroxide, silica gel, various dyes, epoxy resins, various auxiliaries, etc.
4. Food medicine: pollen, hawthorn, pearl powder, Ganoderma lucidum, various vegetable flour, various Chinese herbal medicines, various health products, cosmetics, antibiotics, etc.
5. Metal materials: aluminum powder, magnesium powder, zinc powder, tin powder, copper powder, etc.
6. Other materials; ceramics, refractory materials, electronic materials, magnetic materials, rare earth materials, phosphors, photocopying materials.

Fluidized Bed Jet Mill of Protein is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the order of downtime is:

inverter - feeder - Main air valve - Compressor - stage impeller - Motor cyclone material, dust removal switch - fan - Main power supply - air compressor.
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
Alpa Pectin Fluidized Bed Jet Mill of Protein Share: Yantai A pectin shares, the company needs to purchase ultrafine pulverized equipment for pulverizing gelatin. Through multi-party investment and incomplete experiment, the company purchased our AlPa's Fluidized Bed Jet Mill of Protein as its pectin ultrafine pulverized equipment.
Technical parameters:
finished particle size: 60-200 目
Production capacity: 300kg


If you have something about other crushers, you want to know, welcome to consult!