Spiral Jet Crusher Of Protein

Most of the product production and processing in the current stage use Spiral Jet Crusher of Protein for the use of the product of the product of the product is one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, and the technology of grading equipment It is also imminent to replace. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

What is the design structure of Spiral Jet Crusher Of Protein?

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The grading point can be continuously adjusted, and the particle size of the Spiral Jet Crusher of Protein can be adjusted. The granular weight of the graded weight can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micro-micro products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.




The factors affecting the operation efficiency of Spiral Jet Crusher Of Protein have the following points:

1. Material performance, in general, air pulverization equipment can Adapt to the break of all brittle materials, but due to the different material properties, the pulverization performance is also different. Due to the intensity, density, hardness, viscosity, shape and electrical performance of different materials, the strength of the material is intensity. It is an important factor, and some of the water content changes in the performance, toughness and viscosity of the crushing material, and the fineness of the pulverized material will also produce noise.

2. If the processing capacity of the device is the same, if the processing material is different, the grinding fineness will be different. In general, the processing capacity of the airflow grinding machine is proportional to the particle size of the product.

3. The influence of back pressure refers to the average pressure of the pulverized indoor gas, and the increase in back pressure is not conducive to the crushing process, affecting the efficiency of gas flow grinding equipment.

ALPA Battery SpiralJet Crusher of Protein case sharing:
A new energy company is a high-tech enterprise specializing in the development, production and sales of new energy materials. The company is committed to the research and innovation of new energy materials. The company's products include a lithium battery special fourLithium manganganate of oxide three manganese, magnetic material tetraside and lithium battery positive electrode material.
The company has advanced technology and excellent quality, and has established a complete quality management operation system.
Case parameters

Product particle size: D50: 15μm

Hour yield: 600kg

ALPA technology research and development of crushing equipment has been applied in many actual engineering cases, to objectively understand jet grading technologyBasic information is provided.