Jet Mill of Mosapride

We all know that Jet Mill of Mosapride is a very strong airflow crushing equipment, many stubborn materials that encounter the crusher will be cut into a uniform block,

Jet Mill of MOSAPRIDE is a classified device that is widely used in the current phase, which has very good fineness in production, which can be finely pulverized silicon carbide, metal, ore and other substances, and can also perform purity It is required to produce high ceramics, medicine, and biochemical products.

JET MILL OF MOSAPRIDE Working Principle: Airflow Crusher and Cyclone Separator Distant Machine Machine Confused System, compressed air is filtered and dried, then through the Raval nozzle in multiple high pressure air intersection Enter the crushing room at high speed. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classification machine, the fine particles that satisfy the particle size required by the grading wheel with thickness, fine product to collect the fine particles and dust collectors by the grading wheel with the thickness, fine particles of the particle size and the dust collector and dust collectors. And continue to break in the broken area.

High-pressure gas (compressed air, superheated steam or other gas) injected from the pulverization chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber were subjected to tangential shock of the air flow injected from different angles. The solid particles collide with each other and friction in the mixed airflow. Since the temperature generated during the pulverization is small, it is conducive to the low melting point crushing material. When toxic, flammable or radioactive substances are crushed, superheated steam is usually used to prevent outwardly spread.
This is because all materials can be precipitated when steam is condensed. The gas flow pulverizer utilizes the material to achieve huge kinetic energy under the action of the high-speed airflow, causing the high-speed collision and the severe friction between the particles, while the high-speed airflow generates shear effects, thereby achieving the purpose of pulverization.

Jet Mill of Mosapride should be maintained and maintained
1. Before using it, check all standard parts of the equipment to tighten, the belt is not tightened.
2, the spindle operation direction must conform to the direction of the arrow shown on the protective cover, otherwise it will damage the equipment, and may cause human damage.

3, check the electrical appliance is not intact.

4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.


ALPA Water Available FENI50JET MILL OF MOSAPRIDE Case Sharing: This customer needs a device that can make ultrafine pulverized metal powder.Finally, we purchased our AlPA CSM710-V mechanical grinder.
Technical parameters:
Production capacity: 200-250kg

I hope everyone can buy the airflow crusher product for yourself!