Steam Jet Mill for Codonopsis

STEAM JET MILL for Codonopsis as a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from dozens of micro-test test, With a large production of hundreds of tons, Steam Jet Mill for Codonopsis relies on which the particle size distribution is narrow, the average particle size is fine; the powder is good, the product is purity; suitable for low melting point, thermal drugs; good sealable, less pollution; Easy; crushing - mixing - dry online operations, etc. have been widely recognized by the company.

Steam Jet Mill for Codopsis's main performance characteristics:

1, it contains vertical hierarchical devices, product size D97: 8 150 microns adjustable, well-grained shape, and narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time.
2, this device is disassembled and cleaning, the inner wall is smooth, and there is no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process.
3, the control system uses program control and easy operation.



Steam Jet Mill for Codopsis principle and features: When the compressed gas passes through the feed injector, the pulverized raw material enters the pulverization room, there are multiple pulverized nozzles in the pulverizing chamber, and the supersonic air flow, The material is subjected to high speed impact and the material collide with the material, and the grading tube is separated. The coarse particles are separated, and the coarse particle cycle returns to the pulverized chamber, and the interior closed circuit is pulverized, and finally the distribution is uniform. Ultrafine powder. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.

Ultraflight Steam Jet Mill for Codopsis is a wide-ranging device that uses air separation, heavy polishing, and shear. It is widely used in various industries. Let's take a brief introduction to its daily maintenance content.

2, easy to wear parts should pay attention to the degree of wear, at any timeFocus and do preparing for replacement of wear parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.

ALPA White Carbon Black Steam Jet Mill for Codonopsis Case Sharing: The company is a company engaged in white carbon black production. A ultra-fine pulverization apparatus for producing two granular white carbon products can be generated in the production process. After investigation, finally purchased our AlPa Steam Jet Mill for Codonopsis.
Technical parameters:

Production capacity: 30kg


Shandong Alpa is the source manufacturer of Steam Jet Mill for Codonopsis, all year round To provide equipment at home and abroad, welcome to inquire!