Air Classifier Mill for polyethylene wax

Air Classifier Mill for polyethylene Wax is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is fine, the granules are delicate, affordable.

AIR Classifier Mill for polyethylene Wax:

Using high pressure airflow to strain, ensure the purity of the material, facing the high hardness of higher materials can be used as high hardness ceramic corundum The pulverization cavity is greatly reduced to reduce the wear of the pulverizer to ensure that the purity of the material is low-temperature, or the inert gas is pulverized, such as nitrogen, carbon dioxide, is suitable for high activity, flammable and explosive non-metallic mine powder.

High capacity, fast efficiency; compared with other ultra-fine pulverizations of the same capacity, because the continuous feed of Air Classifier Mill for polyethylene Wax, continuously pulverized, continuously, the characteristics of continuous recovery have greatly improved its pulverization efficiency And with the mode of automation control, it is much higher than other devices.

The structure is simple, the disassembly and cleaning is convenient, there is no need to lubricate oil, etc.

The product is fine, the particle size distribution is uniform, and the grading effect of Air Classifier Mill for polyethylene Wax has excellent ultrafine powder fineness and distribution, and then cooperate with Air Classifier Mill for. Polyethylene WAX \u200b\u200bis more likely to make the product particle size and distribution far better than the processing of other equipment.

After entering the hierarchy, the distribution plate on the discharged wheel is uniform. Allocate and thrown into the ring, fall into the grading area.

The graded air enters the spiral wind chamber, through the guide disk blade flows into the grading wheel in the center direction, and the fine powder satisfying the particle size is separated under grade gravity. Fine powder flows at high speeds and enters the fine powder trapping system from the grading air and then separated from the grading air. The coarse powder falls into the lower part of the graded machine.


Super Micro Air Classifier Mill for polyethylene Wax Operation:

2,Take over the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.

ALPA Paint Slazing Air Classifier Mill for Polyethlene Wax Case Sharing: This customer is an investigation of domestic similar companies, and did not find a crusher who can crush the paint slag. Finally, I know that our Shandong Alpa is a non-standard custom-made enterprise that is a super-smashing equipment, and I have found us. We have repeatedly tried, and we found a super-pulverizing machine suitable for crushing paint slabs. Finally, the customer purchased our company's Air Classifier Mill for Polyethylene Wax, the most crushed oil paint slag.
Technical parameters:

Production capacity: 800-1000kg


I hope everyone can buy the favorite airflow crusher product. !