Steam Jet Mill for Zeolite Powder

STEAM JET MILL for Zeolite Powder is good, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.

Steam Jet Mill for Zeolite Powder is a very important application of the powder industry. Steam Jet Mill for Zeolite Powder uses compressed air to be frozen, filtered, dried, and the pulverizing chamber is injected through the nozzle. Accelerated materials gather in the intersection of multiple nozzles jet gas flow, resulting in severe collision, friction and shearing, thereby achieving ultrafine pulverization of particles. Air flow grinding has the characteristics of low energy consumption, stable operation, simple structure, convenient operation and maintenance. It is real multi-purpose, high efficiency, low-cost new crushing equipment. It can be said that modern industrial production is inseparable from airborne flow, but air flow milling equipment often requires continuous operation, long working hours, which is greater than the equipment itself is large.

Let's take a look at the Features of Steam Jet Mill for Zeolite Powder.

1, can effectively reduce cost, reduce cost, suitable for low value of coarse powder.
2, simple structure, convenient maintenance, less easy to lose weight, low operating noise, low energy consumption.
3, the classification machine uses large diameter single-stage classification wheels to improve production capacity.
4, the inner wall smooth and wear, more conducive to the classification of materials.
5, use a negative pressure operation, so that it does not leak, to achieve environmental requirements.
6, running stable and reliable, its product can be uniform.
How do I solve the problem of STEAM JET MILL for ZEOLITE POWDER? Let's take a look.

1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.

2. There is also noise during the pulverization. The cooling sleeve can be used to reduce the temperature, which can allocate water in the crushing chamber.
3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.


ALPA Composite Powder Steam Jet Mill for Zeolite Powder Case Sharing: This customer is a renewable resource company that requires the selection of different granular sections of composite powder, and it is necessary to select a super less than 30 μm. powder. Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our AlPa, and selected our vertical grading machine equipment. Product particle size: D97 ≤30μm hour yield: 80T

Welcomes major composite powder manufacturers to factory to visit, incompetent experiments.

Welcome everyone to inquire!