Home >> News >> Air Classifier of Lassidipine

Air Classifier of Lassidipine

Publish: 2021-10-26 17:02:36

Views:

Air Classifier of Lassidipine is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is fine, and the particles are delicate, affordable.

What is the design structure of Air Classifier of Lassidipine?


Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The grading point can be continuously adjusted, and the granularity of the AIR Classifier of Lassidipine can be adjusted. The granular weight of the graded weight can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micro-micro products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.


AIR Classifier of Lassidipine Working Principle:
After the material feed port is entered into the grading machine, the distribution disc on the standing hierarchy is evenly distributed. And thrown into the ring and fall into the grading area.

The graded air enters the spiral wind chamber, through the guide disk blade flows into the grading wheel in the center direction, and the fine powder satisfying the particle size is separated under grade gravity. Fine powder flows at high speeds and enters the fine powder trapping system from the grading air and then separated from the grading air. The coarse powder falls into the lower part of the graded machine.



In production, the use of Air Classifier of Lassidipine, there will be a large amount of dust, if a large amount of dust will have a certain impact on the environment, how should we What is the treatment?
Next, several methods:
1, install the dust collector: Generally now this dust collector can be used with a powder classifier, it puts the dust income to catch the bag, dust is filtered by the dust box Over-discharge;
2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Pay attention to parking during operationThe powder should be blocked, and the dust is cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.

ALPA Composite Powder Air Classifier of Lassidipine Case Sharing: This customer is a cement manufacturer, wants to grade cement filler composite powder, select the composite powder of the appropriate particle size, thus enhance the performance of cement . Investigate the domestic powder equipment manufacturer, and finally chose our AlPA classifier to achieve the pursuit of large capacity, and ensure the particle size of the powder.
Case parameters:
Powder particle size: D50: 6.8μm
Hour Yield: 25T
For powder production companies, customized production, non-standard customized products are an advantage . The demand for each company is different. Therefore, the non-standard custom of powder equipment has gave birth to the powder equipment, and the ALPA of Shandong is a powder equipment non-standard custom enterprise. Our crushing equipment customized for Taiwan companies is a good case. Enterprises that have powder equipment customization needs to contact us.

Shandong Alpa supplies a variety of AIR Classifier of Lassidipine. If you need to purchase Air Classifier of Lassidipine, please feel free to contact us.

CONTACT US
  • E-mail: marketing@alpapowder.com

  • Add.: No.168, Wenhua Road, Advanced Manufacturing Industrial Park, Anqiu, Weifang City, Shandong Province, China.