Spiral Jet Mill for Catalyst Precursor

Spiral Jet Mill for Catalyst Precursor as a clean, efficient, high-level, high-yield of advanced crusher models in the pulverization of Western medicine raw materials, from a few of dozens of micro test Large-scale production of hundreds of tons of production, air flow milling with narrow particle size distribution, average particle size; good powder shape, high product purity; suitable for low melting point, thermal drug; good sealable, low pollution Easy to operate; crushing - mixed - dry online operations have been widely recognized by the company.

The airflow classification is based on centrifugal force, gravity, inertial force, etc., produces different motion trajectories depending on the gas (usually air), gravity, and inertial force to achieve different particle sizes. Classification. Spiral Jet Mill for Catalyst Precursor can be divided into static classifiers and dynamic hierarchies depending on whether there is moving parts. Spiral Jet Mill for Catalyst Precursor has become better and better. Many industries need to control the particle size of fine powder.

The working principle of Spiral Jet Mill for Catalyst Precursor is: the compressed air is dried, and the pulverizing cavity is entered through the nozzle. In the pulverizing cavity, the material can be pulverized by a high pressure gas stream. Thereafter, the crude material can be separated from the centrifugal force generated by the grading turbine. Particles that meet the particle size requirements are in the cyclone separator and the dust collector, and the particles collected, and the particles that do not meet the requirements continue to be pulverized.

Spiral Jet Mill for Catalyst Precursor Installation Precautions
1. Preliminary checks for host devices such as classifiers, wind turbines, and have ergonical damage during transportation or long-term storage, check the device inner cavity There is no abnormality in the fan airway, turn the hierarchical impeller and the wind turbine, and observe whether it is flexible.
2. Check the degree of fastening of the equipment pre-installed components, and must be added to the lubricating oil to be lubricated.
3, the mounting grading wheel should strictly prevent collision, classify the host, and the fan should be tested, and the level is specified by the gasket, and there is a basic requirements and the foundation fixation.
4, require the sealing pipe interface to configure the sealing gasket.
5, after the layout machine is installed, first observe the direction of grading motor.
6. When the control cabinet is installed, the corresponding relationship between the terminal sequence number and the equipment is carefully verified.
7. After the installation is completed, the first empty car is running 1-2 hours, and it is easy to securely check the accuracy and coordination of the equipment action at any time.

Alpa carbonate Spiral Jet Mill for Catalyst Precursor case sharing: This customer is a company, selling new materials such as lithium carbonate, lithium hydroxide, potassium sulfate, and salt, found that the current customer needs during its sales of lithium carbonateIt is the ultrafine powder of lithium carbonate, so it upgraded the production line of lithium carbonate, purchasing our AlPa's multiple Spiral Jet Mill for Catalyst Precursor.
Technical parameters:
Finished granularity: D50: 5-8μm
Production capacity: 450kg

Welcome to inquire!