Steam Jet Mill for Steel Slag

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

STEAM JET MILL for Steel SLAG is a commonly used airflow pulverization method, also known as fluid energy mill for micronization of solid materials. In many cases, the micronization process is generally considered to be a black box that produces fine powder and crude particles.

The working principle of Steam Jet Mill for Steel SLAG is a complete crushing system composed of crusher and cyclone separator, dust collector and air. After the compressed air is filtered, the high-speed nozzle is sprayed into the crushing chamber, and the material is pulverized by repeated collision, friction and shearing at the intersection of the multi-high pressure airflow. The crushing material moves together with the rising airflow to the classified area with the suction of the fan. Under the action of centrifugation, the thickness of the material is separated, and the graded cyclone is required to grade the cyclone to enter the cyclone dust collector, and the coarse comminution continues to be pulverized down. Suitable for dry crushing of various materials that are less than 9 in the Moh, especially for high hardness, high purity, high value-added crushing materials. It includes a vertical hierarchy device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. Low temperature without media crushing. It is especially suitable for thermal sensitivity, low melting point, sugar-containing and volatile substances. The grinding process is mainly dependent on the collision of the material itself, and is different from the impact of the mechanical crushing blade or the hammer on the ground on the ground, so the equipment is high, and the product is purity.

In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

ALPA Activated Carbon Steam Jet Mill for Steel SLAG Case Sharing: This customer is a research institute Dalian, which requires ultrafine pulverizing activated carbon during research. Inspect a number of domesticVendor, finally choosing to work with our AlPa, purchasing a Steam Jet Mill for Steel Slag.

If the later period is intended for superfine grade machines, precision grading machines, jet classifiers, you can directly contact us, product quality is guaranteed, fair, good service, welcome everyone to buy!