Steam Jet Mill for Coral Powder

With the development of society, the application of STEAM JET MILL for Coral Powder has become more large.

Many manufacturers who want to make a crushing process will choose to purchase a Steam Jet Mill for Coral Powder, but not all crushers can be applied, and the wrong processing method will make the pulverizer wear speed change quick. The mill is wear is too fast, and the inner cavity of the pulverizer of the material should be selected when the material hardness is too large. The equipment operates for a long time in a higher crushing pressure, which requires a periodic replacement loss for uniformity. The products after crushing are generally single peaks, and if there is a double-peak or peak, there is a unstable pressure. The solution is based on the gas supply of the gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure. The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform liquidity, and the stable control feed speed. A filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cakes in the crushed chamber will then return to the production.

Steam Jet Mill for Coral Powder can be used in series with a multi-stage classifier and produced a product having multiple particle sizes. The device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly. The control system uses program control and easy to operate.

Affecting the privacy of the life and quality of Steam Jet Mill for Coral Power Powder is as follows:

1. The properties of the material.
In general, the pulverizer can accommodate all brittle materials, but due to the different material properties, the pulverization performance is also different. Due to the intensity, density, hardness, viscosity, shape and electrical performance of different materials, inevitable The difference in crushing effect is caused, wherein the strength of the material is an important factor, while the material that is too high can also result in a decrease in the life of the gas flow grinding.
2. Use time.
If the crusher is working continuously, it will also affect the service life of gas flow grinding, greatly increasing its failure probability.

Alpa White Carbon Steam Jet Mill for Coral Powder case Share: The company is a company engaged in white carbon black production. A ultra-fine pulverization apparatus for producing two granular white carbon products can be generated in the production process. After investigation, finally purchased our ALPA Steam Jet Mill for Coral Powder.

Technical parameters:
Finished particle size: D50: 6.78 D90: 12.8μm
Production capacity: 30kg

Shan dong alpa is a scientific and technological private enterprise that produces various airflow pulverations, airflow mill, medical gas flow crusher, disc air crusher, Users who need to purchase such products can contact us.