pin mill of Biological straw

Pin Mill of Biological Straw as a striped main equipment, the role is also increasing, in the industrial sector of metallurgy, mine, chemical, cement, has a large nμmber of raw materials and reuse waste every year. Processing is performed with a classifier. In the coking plant, sintering plants, ceramics factories, glass industries, powder metallurgy, etc., need to break the raw materials to the particle size of the next job requirements. In the chemical, power sector, the hierarchy, the raw material is broken, grind, and increases the surface area of ​​the material, has created favorable conditions to shorten the chemical reaction of the material.

Many manufacturers who want to make a crushing process will choose to purchase a Pin Mill of Biological Straw, but not all crushers can apply production and processing, and the wrong processing method will make the pulverizer wear speed becomes fast. . The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large.

The device operates for a long time in a higher pulverized pressure, which requires uniformity of cyclical replacement loss.

The products after the crushing are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.

AlPa Trimage Materials Pin Mill of Biological Straw Case Sharing: The company requires a three-dimensional material ultrafine pulverizer, and our AlPA's Pin Mill of Biological Straw is also more well-known. There is a lot of proportion in the industry. Through experiments, the company purchased a Pin Mill of Biological Straw of our company.
Technical parameters:
finished particle size: D50: 10μm
Production capacity: 5-10kg / h

ALPA Technology recommends that you should pay attention to periodically checking the performance of the equipment during use using ultrafine gas flow grading machines, jet grading machines, powder classifiers, must pay attention to regular inspection equipment performance and prevent malfunction during use.